Hi,

we are monitoring 221 servers from a dedicated PA Monitor server (quad core / 8GB / Server2008R2) and are seeing quite a lot of messages in the SNMP Bandwidth monitor ur CPU is steady at about 20 - 25%, memory usage is at approx 3GB. the ServerMonSvc.exe *32 process has 113 threads and 2270 handles but is only using 10% processor usage.

We are now going for long periods of time where the PA Server Monitor is not logging the bandwidth usage on our Cisco ASA interfaces. We are running 5.2.0.32 but have see this for several versions.

your website suggests "Monitor 1000+ servers/devices from a single installation" however I cannot find any server specifications but I would assume that our spec of server is plenty good enough.

Any suggestions?

Thanks

Steven Johns

asked 29 Jun '13, 09:00

StevenJohns's gravatar image

StevenJohns
6131314
accept rate: 0%


Hi Steven,

Can you tell me what your "Target average CPU usage" is set at? You can find this setting in the Setting Menu by clicking the Setting button.

Thanks
Quinn

Please make sure to mark your questions accepted when you have your answer by clicking the gray check mark to the left of the answer.

link

answered 02 Jul '13, 09:41

Quinn's gravatar image

Quinn ♦♦
14.4k3925
accept rate: 35%

Hi,

I have the same problem. Most of my SNMP checks on sentral server says "Resources in use--will try again soon". Target average CPU usage is set to 60%. The CPU runs normal at 5-6%

link

answered 26 Feb '14, 05:41

kjb's gravatar image

kjb
16135
accept rate: 0%

Hi --

Another fix for this issue can also be changing the cap that is set for the number of SNMP monitors that can be running at one time. If SNMP monitors try to run and the system has hit the max number running the monitor will try to run again in about a minute. The "Monitor busy" message that you are getting is just letting you know that the max number has been hit and that the monitor is waiting and try again.

If you need to increase the max number of SNMP monitors that can run at the same time there is a registry value that you can change, "MaxSNMPMgrUsage".

Location:
32-bit:
HKEY_LOCAL_MACHINESOFTWAREPowerAdminServerMonitorMaxSNMPMgrUsage
64-bit:
HKEY_LOCAL_MACHINESOFTWAREWow6432NodePowerAdminServerMonitorMaxSNMPMgrUsage

Thanks
Quinn

Please make sure to mark your questions accepted when you have your answer by clicking the gray check mark to the left of the answer.

link

answered 26 Feb '14, 09:38

Quinn's gravatar image

Quinn ♦♦
14.4k3925
accept rate: 35%

on which system should be the value assigned, satellite or central monitoring or both? Regards MTE

link

answered 08 Mar '15, 03:31

MTE's gravatar image

MTE
14221320
accept rate: 13%

MTE,

You will only have one "PowerAdminServerMonitor" entry in the registry, please put the value in either the Wow6432 or the non Wow6432 location.

Thanks
Quinn

Please make sure to mark your questions accepted when you have your answer by clicking the gray check mark to the left of the answer.

link

answered 09 Mar '15, 16:05

Quinn's gravatar image

Quinn ♦♦
14.4k3925
accept rate: 35%

Your answer
toggle preview

Follow this question

By Email:

Once you sign in you will be able to subscribe for any updates here

By RSS:

Answers

Answers and Comments

Markdown Basics

  • *italic* or _italic_
  • **bold** or __bold__
  • link:[text](http://url.com/ "title")
  • image?![alt text](/path/img.jpg "title")
  • numbered list: 1. Foo 2. Bar
  • to add a line break simply add two spaces to where you would like the new line to be.
  • basic HTML tags are also supported

Tags:

×81
×7
×2

Asked: 29 Jun '13, 09:00

Seen: 9,721 times

Last updated: 09 Mar '15, 16:05